QUICK ANSWERA digital shelf-edge display is an ultra-wide LCD screen mounted along the front edge…
Tegometall Compatible Signage | Digital Shelf Screens
QUICK ANSWER
eShelf® digital stretch screens are designed to mount on existing shelving systems like Tegometall using secure snap-in brackets and integrated safety screws. The low-profile design (about 2″ high) and aluminum profile mounting rail let retailers add digital signage without replacing shelving or losing product facings. The LUXX Power Track System handles clean power for multiple screens along the same run.
Key Takeaways
- eShelf® mounts to existing Tegometall shelving with snap-in brackets and safety screws, no replacement needed.
- The low-profile design (about 2″ H × 23″ W) sits on the shelf lip without stealing product facings.
- One aluminum rail supports multiple screens and electronic shelf tags along a single run.
- The LUXX Power Track System distributes clean, modular, magnetic power across screens.
- Retrofitting protects your existing shelving investment versus a costly rip-and-replace.
Tegometall Compatible Signage: If your store is built on Tegometall shelving, you already know how much it costs to change anything about it. So the first question any signage vendor should answer is simple: will this mount on what I already have? Too many digital signage solutions assume you will rebuild your fixtures around them, an expensive, disruptive non-starter for most retailers.
For eShelf®, the answer is yes. This guide explains exactly how the mounting works, why the low-profile design protects your product space, how power is distributed cleanly across a run, and why retrofitting onto your existing Tegometall shelving beats a rip-and-replace every time.
Built to Fit Existing Shelving
eShelf® stretch screens mount seamlessly to existing shelving systems like Tegometall using secure, snap-in brackets and integrated safety screws. There is no need to rip out and replace your shelving to go digital, the screens attach to the fixtures you already have, which is the single biggest factor in keeping a digital upgrade affordable.
The aluminum profile mounting rail supports multiple screens and electronic shelf tags along the same run, so a single rail can carry an entire aisle’s worth of signage. That shared infrastructure is what makes scaling across a store practical rather than a series of one-off installs.
Snap-in mounting also means the install is fast. A screen attaches in moments, and the integrated safety screws keep it secure in a high-traffic retail environment without an elaborate bracketing system.
Low Profile, Zero Wasted Facings
A common objection to shelf-edge screens is that they steal product space. eShelf® answers it with a low-profile design, just about 2″ high by 23″ wide, with custom sizes available. That slim form factor means the screen lives on the shelf lip where price cards used to be, not in front of your products.
Preserving facings matters more than it sounds. Every inch of shelf you give up to signage is inventory you cannot display, so a screen that occupies the price-card zone rather than the product zone delivers persuasion without a merchandising trade-off. You gain a dynamic sales tool and keep your full product presentation.
The anti-glare finish and low operating temperature round out the design, so the screen reads clearly under store lighting and runs cool in tight shelf installs.
Clean Power Without a Rewire
Mounting is only half the install, power is the other half, and it is where messy deployments go wrong. The LUXX Power Track System mounts to the back of the shelf and distributes power across multiple screens with vertical tracks, horizontal tracks, and power feed connectors.
Magnetic wiring and modular power tracks keep the install clean and let you add or move screens without an electrician on every visit. For a Tegometall run, this means you can light up an entire aisle from a single, tidy power backbone rather than a tangle of individual cords.
The modularity also future-proofs the deployment. As your needs change, a new promotion, a reset planogram, an added feature shelf, you can reposition screens along the rail and reconnect power without reworking the whole installation.
Why Retrofit Beats Rip-and-Replace
Replacing shelving to add digital signage is the most expensive way to modernize a store. Retrofitting onto your existing Tegometall fixtures protects that investment, you keep the shelving you already paid for and simply add the screens on top. The savings are substantial and immediate.
The eShelf® approach is purpose-built for this. A consistent bracket and power-track system means you can start with a single test aisle, prove the concept, and expand at your own pace without ever touching the underlying shelving structure. That lowers both the financial and operational risk of going digital. The same applies if your stores run other fixtures, see our guides to Lozier-compatible and Madix-compatible shelf signage.
Retrofitting is also faster to deploy. Because you are adding to existing fixtures rather than rebuilding them, an aisle can go live in a fraction of the time a full fixture replacement would take, with no extended closure of the section.
Compatible Beyond Tegometall
While Tegometall is a common European and North American standard, the same snap-in mounting philosophy adapts to other shelving systems too. The aluminum profile rail and modular brackets are designed to integrate with existing retail fixtures rather than demand a specific one, which broadens where eShelf® can deploy.
If you are unsure whether your shelving will accept the brackets, the safest step is to send your fixture details to a specialist before ordering. Matching the mount to your shelves up front is what keeps the install fast and clean, and it avoids surprises on deployment day.
Planning Your Retrofit Aisle by Aisle
A successful retrofit starts with a simple audit. Walk your store and note which aisles use Tegometall (or compatible) shelving, which shelves carry your highest-margin products, and where your current paper signage is working hardest. Those high-margin, high-effort shelves are where a digital retrofit delivers the fastest return.
Because eShelf® mounts to your existing fixtures, each aisle is an independent, low-risk addition rather than a structural project. Fit the aluminum rail, snap in the screens, run the power track, and the aisle is live, with no impact on the shelving itself or the aisles around it.
Documenting your bracket positions and power layout on the first aisle creates a template you can replicate across the store and, eventually, across locations. The retrofit model turns a daunting store-wide upgrade into a series of quick, repeatable wins.
Pick Your Screen, Keep Your Shelves
Because the mounting system is consistent across the line, you can mix sizes on the same Tegometall run, a 23.1″ for pricing here, a 35″ 4K for a feature there, even a touch model for self-service. The shared rail and power track tie them all together cleanly.
See the full mounting and power details on the Powering & Mounting page, or our step-by-step retail stretch display installation guide.
| Component | What it does | Benefit |
| Snap-in brackets | Attach screens to Tegometall rails | Fast, secure, no fixture replacement |
| Aluminum profile rail | Carries multiple screens + shelf tags | One backbone per aisle |
| LUXX Power Track | Vertical/horizontal power distribution | Clean power, no rewire |
| Low-profile design | ~2″ H × 23″ W on the shelf lip | Zero wasted product facings |
Frequently Asked Questions
Does eShelf® mount on Tegometall shelving?
Yes. eShelf® stretch screens are designed to mount on existing shelving systems like Tegometall using secure snap-in brackets and integrated safety screws, no shelving replacement required.
Will the screen take up product space?
No. The low-profile design is about 2″ high by 23″ wide and sits on the shelf lip where price cards normally go, with custom sizes available, so you keep your product facings.
How are multiple screens powered?
The LUXX Power Track System mounts to the back of the shelf and distributes power across multiple screens using vertical tracks, horizontal tracks, and power feed connectors, with magnetic, modular wiring.
Can eShelf® mount on shelving other than Tegometall?
The same snap-in mounting philosophy adapts to other retail shelving systems. Send your fixture details to a specialist to confirm compatibility before ordering.
Is retrofitting cheaper than replacing shelving?
Yes. Retrofitting onto existing fixtures protects your shelving investment, deploys faster, and lets you start with one test aisle and scale without ever rebuilding the underlying structure.
About the Author
LUXX Retail Technology Team, Digital Signage & Shelf-Edge Display Specialists
The LUXX Retail Technology Team designs, deploys, and supports eShelf® shelf-edge display systems for grocery, beauty, spirits, convenience, and specialty retail across five continents. This guide reflects hands-on experience installing ultra-wide stretch screens, header displays, and electronic shelf-tag pricing on live retail fixtures.
Explore Related eShelf® Products
